Glossary · Bathroom terms

Fill Valve / Flapper

Definition

The tank components that refill after a flush (fill valve) and release water to the bowl (flapper). The usual culprits in a running toilet.

Source: Wikipedia — Fill Valve (Ballcock)

  • Fixture Clearance

    The required spacing between and around fixtures (e.g., centerline-to-wall at a toilet, space in front of a vanity). Code minimums exist;…

  • Faucet Hole Configuration

    The number and spacing of holes drilled in the sink or top (single, centerset 4 in., widespread 8 in.). Must match the chosen faucet — de…

  • Floating / Wall-Hung Vanity

    A vanity mounted to the wall with open floor beneath. A contemporary look that eases floor cleaning but requires solid in-wall blocking t…

  • Fan/Light Combo

    A combined exhaust fan and ceiling light (sometimes with heater or Bluetooth). A common space-saving fixture; the fan still must be ducte…

  • Framed / Semi-Frameless Door

    Enclosures with full or partial metal framing around thinner glass. More economical than frameless; the framing collects grime over time.

  • Fan CFM Sizing

    Sizing the exhaust fan to the room — a common rule is 1 CFM per square foot, more for large baths or enclosed tub/shower areas. Undersize…

  • Frameless Shower Door

    A thick tempered-glass door/panel with minimal hardware. The premium modern enclosure; requires precise opening tolerances and solid anch…

  • Escutcheon

    The decorative trim plate covering the wall or deck penetration around a valve, faucet, or pipe — the visible cap over the rough plumbing.

Ready to Start Your Project?

Get a free estimate based on real Columbus contractor pricing.

Start Estimating → Read the bath guides